tlp logix pro project 2

If you know how to use tlp logic pro it will be an easy project

Project 2 – PLC ladder logic program for two-way traffic control

Use LogixPro software to write and test a ladder logic program to control the traffic simulator in LogixPro. The requirements for this ladder logic program are as follows:

1. Red light “on” in one direction for seven seconds, while simultaneously green light “on” for five seconds followed by yellow light “on” for two seconds in other direction
2. Sequence of lights in both direction are red “on” for seven seconds, followed by green “on” for five seconds, followed by yellow “on” for two seconds
3. One light should be “on” in both directions at all times

Submission Requirements

Submit by uploading the LogixPro Ladder File (RSL file) of your work with filename lastname_firstname_project2

Grading Rubric

Grading of your submitted project:

75% for meeting all 3 of the requirements listed above (25% for each requirement), 15% for clear labeling of all program instructions used, 10% for proper ladder logic rung use (i.e., one rung per OTE and timer instruction)