USA: +1(669)289-8683 
Sign in
Purpose:
This assignment extends the WBS in Unit 3 and uses it as the basis for the project schedule. This assignment focuses on creating the duration estimates, network diagram, and Gantt chart for your chosen project. Creating the duration estimates also includes considering the project resources.
Assignment Instructions
T
here
will be two parts to this assignment. Part 1 will focus on completing the detailed time duration estimates and identifying the resource roles needed for the project. Part 2 will focus on sequencing the project work packages, creating a network diagram, and creating a Gantt chart. You may use MS Excel or MS Project to complete parts one and two of the assignment.
You will be creating time estimates, a Gantt chart, and a network diagram for your project.
Part 1:
Start with the WBS you created for your chosen assignment. Remember to use a time duration estimate technique to achieve your durations. You should complete a duration estimate for each activity, summarize the duration at the work package level, and provide a final duration estimate (summary of work packages) for the project. Durations should be shown on the WBS using a start and end date/time. You will need your time duration estimates for Part 2 to create the Gantt chart and the network diagram.
Part 2:
If you build your time duration estimates in MS Project, the Gantt chart and network diagrams are built automatically. Be careful to check your dependencies (links) between your activities in MS Project, otherwise, you may have a Gantt chart and network diagram that does not correctly reflect your project. If using MS Excel, you can use the template here to complete your time estimates and Gantt chart. Your network diagram can be created using MS PowerPoint. Use shapes and arrows in PowerPoint to create your network diagram at the work package level.
Enter Your WBS Level 1 Work Packages Here
WBS #
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
11.0
12.0
TASKS
Engine Mount Assembly
Shock Cord Mount Assembly
Fin Preparation
Engine Mount Installation
Tube Marking Detail
Fin Attachment
Launch Lug Attachment
Glue Reinforcement
Shock Cord Mount Attachment
Parachute Assembly
Parachute & Shock Cord Attachment to Nose Cone
Finishing Rocket
DAY 1
DAY 2
1 2 3 4 5 6 7 8 9 10 11 12 13 14
DAY 2
DAY 3
DAY 4
DAY 5
15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42
DAY 6
DAY 6
DAY 7
DAY 8
DAY 9
43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72
DAY 10
DAY 11
DAY 12
DAY 13
73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101
DAY 13
DAY 14
DAY 15
DAY 16
102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123
DAY 16
DAY 17
DAY 18
DAY 19
124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145
DAY 19
146 147
Enter Your WBS Here and remove example below
WBS #
TASKS
1.0
Engine Mount Assembly
1.1
Locate engine mount parts
1.1.1
Locate light blue engine mount tube
1.1.2
Locate engine hook
1.1.3
Locate green adapter ring
1.2
Laying mount to ruler
1.2.1
Move tube to ruler
1.2.2
Align with zero mark
1.3
Marking mount
1.3.1
Take pencil
1.3.2
Mark tube
1.3.2.1
Mark 25mm
1.3.2.2
Mark 64 mm
1.4
Cutting mount
1.4.1
Cut 3mm slit
1.5
Inserting hook
1.5.1
Insert hook
1.5.2
Extend hook
1.6
Testing adapter ring
1.6.1
Slide ring into front of engine tube
1.6.2
Slide ring over engine hook to 25mm mark
1.7
Glue & Dry
1.7.1
Apply glue
1.7.1.1
Apply glue to one side
1.7.1.2
Apply glue to other side
1.7.2
Dry glue
1.7.2.1
Set assembly aside
1.7.2.2
Allow to dry
2.0
Shock Cord Mount Assembly
2.1
Locate cord mount parts
2.1.1
Locate cord mount on pattern sheet
2.2
Cut cord mount
2.2.1
Cut cord mount along outline
2.3
Crease assembly
2.3.1
Fold on dotted lines
2.3.2
Crease on dotted lines
2.4
Glue mount assembly
2.4.1
Spread glue
2.4.2
Lay end of shock cord in glue
2.5
Fold mount assembly
2.5.1
Fold section 1
2.5.2
Apply glue section 3
2.5.3
Fold again
2.6
Clamp mount assembly
2.6.1
Clamp assembly
2.6.2
Allow to dry
3.0
Fin Preparation
3.1
Select fin pattern
3.1.1
Select fin pattern
3.1.2
Cut fin pattern from sheet
Fill in your time and cost estimates here. Total for
Duration Start Date End Date
3.2
3.2.1
3.2.2
3.2.3
3.2.4
3.2.5
3.2.6
3.3
3.3.1
3.3.2
3.3.3
3.3.4
3.3.5
3.3.6
3.4
3.4.1
3.5
3.5.1
3.5.2
3.5.3
3.6
3.6.1
3.6.1.1
3.6.1.2
3.6.1.3
3.6.2
3.6.2.1
3.6.2.2
3.6.2.3
3.6.3
3.6.3.1
3.6.3.2
3.6.3.3
4.0
4.1
4.1.1
4.2
4.2.1
4.3
4.3.1
4.4
4.4.1
5.0
5.1
5.1.1
5.1.2
5.2
5.2.1
5.2.2
5.3
5.3.1
5.3.1.1
Trace fin patterns
Trace fin #1
Match fin #1
Trace fin #2
Match fin #2
Trace fin #2
Match fin #2
Cut fin patterns
Cut fin #1
Chect fin #1
Cut fin #2
Chect fin #2
Cut fin #3
Chect fin #3
Save scrap
Set aside piece scrap basa wood
Course sand fins
Lay sandpaper
Stack fins
Sand fins
Fine sand fins
Fine sand fin #1
Round leading edge fin #1
Round trailing edge fin #1
Streamline training edge fin #1
Fine sand fin #2
Round leading edge fin #2
Round trailing edge fin #2
Streamline training edge fin #2
Fine sand fin #3
Round leading edge fin #3
Round trailing edge fin #3
Streamline training edge fin #3
Engine Mount Installation
Locate body tube
Locate body tube
Measure body tube
Measure body tube 38 mm
Spread glue
Spread glue around body tube
Insert engine mount
Insert engine mount assembly into body tube
Tube Marking Detail
Locate tube marking guide
Locate tube marking guide on pattern sheet
Cut guide alone outline
Wrap guide
Wrap guide around body tube
Tape guide to body tube
Mark tube
Mark tube for fins
Mark tube for fin #1
5.3.1.2
5.3.1.3
5.3.2
5.3.3
5.4
5.4.1
5.4.1.1
5.4.1.2
5.4.2
5.4.2.1
5.4.2.2
5.4.3
5.4.3.1
5.4.3.2
5.4.4
5.4.4.1
6.0
6.1
6.1.1
6.1.2
6.1.3
6.1.4
6.1.5
6.1.6
6.2
6.2.1
6.2.2
6.2.3
6.2.4
6.2.5
6.2.6
6.2.7
6.2.8
6.2.9
6.3
6.3.1
6.3.2
6.3.3
6.3.4
6.3.5
6.3.6
6.4
6.4.1
6.4.2
7.0
7.1
7.1.1
7.1.2
7.2
7.2.1
7.2.2
7.3
Mark tube for fin #2
Mark tube for fin #3
Write LL on body tube
Remove guide
Draw fin markings
Fin #1
Draw straight line
Extend line 76mm
Fin #2
Draw straight line
Extend line 76mm
Fin #3
Draw straight line
Extend line 76mm
Draw launch lug line
Draw line 102 mm
Fin Attachment
Apply glue to root edges of fins
Apply to fin #1
Allow fin #1 to dry
Apply to fin #2
Allow fin #2 to dry
Apply to fin #3
Allow fin #3 to dry
Apply second layer glue
Apply more glue to Fin #1
Set fin #1
Press fin #1
Apply more glue to Fin #2
Set fin #2
Press fin #2
Apply more glue to Fin #3
Set fin #3
Press fin #3
Adjust fins
Adjust fin #1
Attach fin #1
Adjust fin #2
Attach fin #2
Adjust fin #3
Attach fin #3
Set aside to dry
Stand rocket on drying table
Allow fins to dry
Launch Lug Attachment
Measure lug attachment
Measure 41mm
Mark attachment point
Glue lug attachment
Apply glue to launch lug
Attach launch lug to body tube
Dry lug attachment
7.3.1
7.3.2
8.0
8.1
8.1.1
8.1.2
8.1.3
8.2
8.2.1
8.2.2
8.3
8.3.1
8.3.2
8.3.3
9.0
9.1
9.1.1
9.2
9.2.1
9.2.2
9.3
9.3.1
9.3.2
9.4
9.4.1
9.4.2
10.0
10.1
10.1.1
10.2
10.2.1
10.2.2
10.2.3
10.3
10.3.1
10.3.1.1
10.3.1.2
10.3.1.3
10.3.1.4
10.3.1.5
10.3.1.6
10.3.2
10.3.2.1
10.3.2.2
10.3.2.3
10.3.2.4
10.3.2.5
10.3.2.6
10.3.3
10.3.3.1
10.3.3.2
10.3.3.3
Ensure launch lug alignment
Allow to dry
Glue Reinforcement
Reinforce fins
Reinforce fin fin #1
Reinforce fin fin #2
Reinforce fin fin #3
Reinforce launch lug
Reinforce side 1
Reinforce side 2
Glue drying
Stand rocket on drying table
Wipe away excess glue
Allow to dry
Shock Cord Mount Attachment
Measure body tube
Measure 25mm
Apply glue
Apply glue to shock cord
Insert cord into tube
Set mount
Set mount 25mm
Press mount into glue
Set glue
Hold mount attachment
Allow to dry
Parachute Assembly
Cut out parachute
Cut parachute along line
Tape removal
Remove tape
Fold shroud lines
Cut shroud lines
Tape attachment
Attach tape rings
Attach tape ring #1
Attach tape ring #2
Attach tape ring #3
Attach tape ring #4
Attach tape ring #5
Attach tape ring #6
Press tape tape rings into place
Press tape tape rings into place #1
Press tape tape rings into place #2
Press tape tape rings into place #3
Press tape tape rings into place #4
Press tape tape rings into place #5
Press tape tape rings into place #6
Punch tape ring holes
Punch tape ring holes #1
Punch tape ring holes #2
Punch tape ring holes #3
10.3.3.4
Punch tape ring holes #4
10.3.3.5
Punch tape ring holes #5
10.3.3.6
Punch tape ring holes #6
10.4
Shroud line assembly
10.4.1
Pass shroud line through hole
10.4.2
Tie lines together
11.0
Parachute & Shock Cord Attachment to Nose Cone
11.1
Shroud line threading
11.1.1
Thread shroud lines
11.2
Parachute pass through
11.2.1
Pass parachute through loop
11.3
Line tightening
11.3.1
Pull lines tight
11.4
Shock cord tie down
11.4.1
Tie down shock cord free end
12.0
Finishing Rocket
12.1
Verify dryness
12.1.1
Check to ensure glue joint are dry
12.2
Prime rocket
12.2.1
Apply primer coat #1
12.2.2
Sand rocket body #1
12.2.3
Apply primer coat #2
12.2.4
Sand rocket body #2
12.3
Paint rocket
12.3.1
Insert paint handle
12.3.2
Apply paint to rocket
12.3.3
Allow to dry
12.4
Apply Water Decals
12.4.1
Cut decals
12.4.1.1
Decal #1
12.4.1.2
Decal #2
12.4.1.3
Decal #3
12.4.1.4
Decal #4
12.4.1.5
Decal #5
12.4.1.6
Decal #6
12.4.1.7
Decal #7
12.4.1.8
Decal #8
12.4.1.9
Decal #9
12.4.1.10
Decal #10
12.4.1.11
Decal #11
12.4.1.12
Decal #12
12.4.1.13
Decal #13
12.4.2
Dip in water
12.4.2.1
Decal #1
12.4.2.2
Decal #2
12.4.2.3
Decal #3
12.4.2.4
Decal #4
12.4.2.5
Decal #5
12.4.2.6
Decal #6
12.4.2.7
Decal #7
12.4.2.8
Decal #8
12.4.2.9
Decal #9
12.4.2.10
12.4.2.11
12.4.2.12
12.4.2.13
12.4.3
12.4.3.1
12.4.3.2
12.4.3.3
12.4.3.4
12.4.3.5
12.4.3.6
12.4.3.7
12.4.3.8
12.4.3.9
12.4.3.10
12.4.3.11
12.4.3.12
12.4.3.13
12.4.4
12.4.4.1
12.4.4.2
12.4.4.3
12.4.4.4
12.4.4.5
12.4.4.6
12.4.4.7
12.4.4.8
12.4.4.9
12.4.4.10
12.4.4.11
12.4.4.12
12.4.4.13
12.4.5
12.5.1
12.4.6
12.4.1
12.5
12.5.1
12.5.2
12.5.3
12.5.4
12.5.5
Decal #10
Decal #11
Decal #12
Decal #13
Slip decals
Decal #1
Decal #2
Decal #3
Decal #4
Decal #5
Decal #6
Decal #7
Decal #8
Decal #9
Decal #10
Decal #11
Decal #12
Decal #13
Blot decals
Decal #1
Decal #2
Decal #3
Decal #4
Decal #5
Decal #6
Decal #7
Decal #8
Decal #9
Decal #10
Decal #11
Decal #12
Decal #13
Dry decals
Allow to dry overnight
Apply clear spray to decals
Apply spray to rocket
Apply large decals
Peel backing
Cut away backing
Align decal
Peel off backing
Smooth decal
ost estimates here. Total for each work package and for the project
Labor Materials Fees Other
Place your roles and hourly rates here. Remove the example and replace with your project roles and rates.
Fitter
Draftsman Cutter
Gluer
Painter
Sander
Sr Sander
$9.00
$35.00
$12.25
$8.00
$11.50
$7.50
$13.00
roles and rates.
