GB519 Measurement and Decision Making

ex_14-56_ex_15-58

GB519 Measurement and Decision Making

Exercise 14-56
Page 629
Exercise 14-56Boron Chemical Company produces a synthetic resin that is used in the automotive
industry. The company uses a standard cost system. For each gallon of output, the
following direct manufacturing costs are anticipated:
Direct labor:

2 hours
Direct Materials: 2 gallons
$25/hr
$10/gal
=$50.00
=$20.00
During December of 2010, Boron produced a total of 2,500 gallons of output and
incurred the following direct manufacturing costs:
Direct labor:4,900 hours worked @ an average wage rate of $19.50/hr
Direct Materials: Purchased: 6,000 gallons@ $10.45/gal
Used in production: 5,100 gallons

Boron recordes price variances for materials at the time of purchase
Required
– give journal entries for the following events and transactions:
1. Purchase, on credit, of direct materials
Actual Cost

6,000 @ $10.45/gal
Standard Cost 6,000 @ $10.00/gal
6000 gallons @ $10 a gallon = $60,000
Price Variance

$2,700
Accounts Payable $62,700
Open account recording will state that direct materials = 6,000 gallons
at $10.00 per gallon wil equal $10.45
2. Direct materials issued to production.
Actual Cost5,100 gallonsStandard Cost 5,000 gallons (2 per unit) @ $10.00/gallon
2,500 x 2 gallons x $10.00 per gallon = $50,000
Variance$1,000
Materials $5,100 gallons x $10.00/gallon = $51,000
Materials cost is $20/unit for full production of the period at 2,500 units

3. Direct labor cost of units completed this period.
Actual Cost4,900 hours @ $19.50/hr
Standard Cost 5,000 hours (2hrs/unit) @ $25.00/hr
2,500 x 2 hours x $25.00/hr = $125,000
Variance = $5.50/hr x 4,900 hours
= $26,950
Efficiency Variance = 100 hrs x $25.00/hr = $2,500
Wages (4,900 hrs x $19.50/hr
= $95,550
Direct Labor cost s ($50/unit) for the completed production (2,500 units)
and the actual labor costs during the period
4. Direct manufacturing cost (direct labor plus direct materials)
of units completed and transferred to Finished Goods Inventory

Actual Cost2,500 unitsStandard Cost 2,500 units @ $10×2+$25×2 = $70.00
Inventory$70.00/unit x 2,000 units
= $175,000
Direct manufacturing costs are recorded using cost of goods
manufactured for the period.
5. Sale, for $150.00 per gallon, of 2,000 gallons of output (hint:
you will need two journal entries here)
Actual Cost2000 gallons
Standard Cost 2000 gallons @ $70.00/unit
$70 x 2,000 units = $140,000

Inventory= $140,000Direct manufacturing cost of cost of good sold for the period.
Accounts Receivable = $150/unit x 2,000 units
= $300,000
Sales Revenue = $300,000
Sales revenue is recorded using accounts receivable.
Dana Revier
GB519 Measurement and Decision MakingProblem 15-58
Page 690
Problem 15-58Four Variance Analysis
Able Control Company, which manufactures electrical switches, uses
a standard cost system and carries all inventory and standard cost.
The standard factory overhead cost per switch is based on direct
labor hours
Variable Overhead
5 hours

$8.00/hr
Fixed Overhead
5 hours$12.00/hr
Total standard overhead cost per unit produced
$100.00
**based on practical capacity of 300,000 direct labor hours per month
The following information is for the month of October:
– The company produced 56,000 switches, although 60,000 switches
were scheduled to be produced
– The company worked 275,000 direct labor hours ata total cost of
$2,550,000
– Variable overhead costs were $2,340,000
– Fixed overhead costs were $3,750,000
The production manager argued during th elast performance review tha the company
should use more up-to-date base for charging factory overhead costs to production.
She commented that her factory had been highly automated in the last two years
and as a result now has hardly any direction labor. The factory hires only highly
skilled workers to set up productionruns and to do periodic adjustments of
machinery whenever the need arises
Required1. Compute the following for Able Control Company:
a. The fixed overhead spending variance for October

Confirming Pages

Chapter 14 Operational Performance Measurement: Sales, Direct-Cost Variances, and the Role of Nonfinancial Performance Measures 629
2. Assume you are the cost accountant at the manufacturing plant where the preceding scenario takes place. According to the IMA’s Statement of Ethical Professional Practice, what are your obligations in this situation?

14-56 Journal Entries in a Standard Cost System Boron Chemical Company produces a synthetic resin that is used in the automotive industry. The company uses a standard cost system. For each gallon of output, the following direct manufacturing costs are anticipated:

Direct labor: 2 hours at $25.00 per hour $50.00

Direct materials: 2 gallons at $10.00 per gallon $20.00

During December of 2010, Boron produced a total of 2,500 gallons of output and incurred the fol-lowing direct manufacturing costs:

Direct labor: 4,900 hours worked @ an average wage rate of $19.50 per hour

Direct materials:

Purchased: 6,000 gallons @ $10.45 per gallon

Used in production: 5,100 gallons

Boron records price variances for materials at the time of purchase.
Required Give journal entries for the following events and transactions:
1. Purchase, on credit, of direct materials.
2. Direct materials issued to production.
3. Direct labor cost of units completed this period.
4. Direct manufacturing cost (direct labor plus direct materials) of units completed and transferred to Fin-ished Goods Inventory.
5. Sale, for $150 per gallon, of 2,000 gallons of output. ( Hint: You will need two journal entries here.)
14-57 Behavioral Considerations and Continuous-Improvement Standards At a recent seminar you attended, the invited speaker was discussing some of the advantages and disadvantages of standard costs in terms of evaluating performance and motivating goal-congruent behavior on the part of employees. One criticism of standard costs in particular caught your attention: the use of conventional standard costs may not provide appropriate incentives for improvements needed to compete effectively with world-class organizations. The speaker then discussed so-called “continuous-improvement stand-ard costs.” Such standards embody systematically lower costs over time. For example, on a monthly basis, it might be appropriate to budget a 1 percent reduction in per-unit direct labor cost. Assume that the standard wage rate into the foreseeable future is $40 per hour. Assume, too, that the budgeted labor-hour standard for October 2010 is 1.0 hour and that this standard is reduced each month by 1 percent. During December of 2010 the company produced 10,000 units of XL-10, using 9,980 direct labor hours. The actual wage rate per hour in December was $42.50.
Required

1. Prepare a table that contains the standard labor-hour requirement per unit and standard direct labor cost per unit for the four months, October 2010 through January 2011.
2. Compute the direct labor efficiency variance for December 2010.
3. What behavioral considerations apply to the decision to use continuous-improvement standards?
14-58 Financial versus Nonfinancial Performance Indicators for Operational Control As indicated in the text, both financial and nonfinancial performance indicators play important roles in an organiza-tion’s overall operational control system. Explain, concisely, the relative advantage of each type of performance indicator. That is, what role would each type of performance indicator play in helping to ensure that operations are in control? ( Hint: Think about this issue both from the standpoint of managers and from the standpoint of operating personnel.)
14-59 Standard Costs and Ethics Ohio Apple Orchards (OAO), Inc., produces an organic, super-premium apple juice that it markets to specialty food outlets. OAO purchases its apples from a select group of farmers located in the Midwest. Recently, a graduate of the local university, Susanna Wu, joined the staff of OAO. Among Susanna’s first responsibilities was the change to develop and implement a standard

Rev. Confirming Pages

690 Part Three Operational-Level Control
Required 1. What is the most appropriate time to record any variance of actual materials prices from standard? Explain.
2. What is the total direct labor rate (price) variance for October?
3. What is the total direct labor efficiency variance for October?
4. What is the total direct materials purchase price variance for October?
5. What is the total direct materials usage variance for October?
6. What is the variable overhead spending variance for October?
7. What is the variable overhead efficiency variance for October?
8. What is the budget (spending) variance for fixed overhead for October?
9. What is the production-volume variance for October?
(CMA Adapted)
15-58 Four-Variance Analysis Able Control Company, which manufactures electrical switches, uses a standard cost system and carries all inventory at standard cost. The standard factory overhead cost per switch is based on direct labor hours:

Variable overhead (5 hours at $8/hour) $ 40

Fixed overhead (5 hours at $12 * /hour) 60

Total standard overhead cost per unit produced $100

*Based on a practical capacity of 300,000 direct labor hours per month.
The following information is for the month of October:

• The company produced 56,000 switches, although 60,000 switches were scheduled to be produced.
• The company worked 275,000 direct labor hours at a total cost of $2,550,000.
• Variable overhead costs were $2,340,000.
• Fixed overhead costs were $3,750,000.

The production manager argued during the last performance review that the company should use a more up-to-date base for charging factory overhead costs to production. She commented that her factory had been highly automated in the last two years and as a result now has hardly any direct labor. The factory hires only highly skilled workers to set up production runs and to do periodic adjustments of machinery whenever the need arises.
Required 1. Compute the following for Able Control Company:
a. The fixed overhead spending variance for October.
b. The production-volume variance for October.
c. The variable overhead spending variance for October.
d. The variable overhead efficiency variance for October.
2. Comment on the implications of the variances and suggest any action that the company should take to improve its operations.
(CMA Adapted)
15-59 Comprehensive Variance Analysis Organet Stamping Company manufactures a variety of prod-ucts made of plastic and aluminum components. During the winter months, substantially all pro-duction capacity is devoted to lawn sprinklers for the following spring and summer seasons. Other products are manufactured during the remainder of the year. Because a variety of products are man-ufactured throughout the year, factory volume is measured using production labor hours rather than units of production. Production volume has grown steadily for the past several years, as the following schedule of production labor indicates:

This year 32,000 hours

1 year ago 30,000 hours

2 years ago 27,000 hours

3 years ago 28,000 hours

4 years ago 26,000 hours